It takes half an hour or so to boot into Windows 7 operating on a 5 MHz Central Processing Unit with 128MB of RAM
TL;DR: The race to 1GHz ended up being greatly a thing that is real the turn of the century. It was quite entertaining as well, coming down to a photo finish between AMD and Intel (the took that is former win by simple times). These times, you cannot look for a desktop that is new from AMD or Intel with a clock speed under 1.6GHz or so. But, you can underclock an existing chip to run much slower and that’s exactly what YouTuber NTDEV did in his latest video.
As part of a quest to the bottom, the YouTuber managed to successfully boot into Windows 7 Ultimate and even multitask with more than one program open at once. It’s not nearly as glamorous as it sounds as Windows had to be run in Safe Mode and loads of system resources needed to be disabled.
The whole thing is run on a machine that is virtual posts showing a Pentium-S clocked at 50MHz alongside 128MB of RAM. Once completely booted (a procedure which takes around 28 minutes), the guy can operate programs like Notepad and another that presents the clock that is current of 5MHz. The YouTuber has even been able to run the system with just 36MB of RAM, but doing so requires using the page file.
If you were wondering, Microsoft recommends at least a processor that is 1GHz 1GB of RAM and 16GB of storage space to run Windows 7. NTDEV told Tom’s Hardware that his install makes use of less than 1GB of space and needed roughly 70MB of memory throughout the demonstration.
Predictably, the device is painfully sluggish however it isn’t the slowest he’s skilled. NTDEV formerly was able to get* that is( XP running at just 1MHz. That configuration took some three hours to boot, he said.
Next on the bucket list is figuring out how to get* that is( 10 or Windows 11 to operate for a processor chip clocked slowly than 1GHz.
Found is just a TechSpot function where we share clever, funny or else interesting material from about the web.